Serving Phoenix
Groundwater & Basement Water Intrusion in Phoenix, AZ
Basement seepage, failed sumps, and hydrostatic pressure against the foundation are extracted and dried, and the path from the ground is identified so the loss does not repeat. Groundwater and basement seepage are extracted and dried only after the path from the soil is identified — a wall, a slab, a drain, or a failed sump. Drying the interior without stopping that path returns the same water to the same floor.
Frequently asked questions
The roof is dry and the water bill jumped. Where is the water?
Usually under the slab or in a cooler line. A supply break on a pad has no basement to drip into, so it travels between slab and flooring until a warm strip, a loose tile, or the meter gives it away. Rain is the wrong first suspect in a climate this dry. The indoor sources run every month.
The evaporative cooler ran all summer. Can that soak a ceiling?
Yes. The unit sits on or in the roof, and a leaking pad, pan, or supply line puts water into the assembly beneath it for hours a day. The stain looks like a roof leak in a month with no storm. Checking the cooler drain and the roof deck under the unit is the first look, before anyone opens a scupper.
A warm strip under the tile and no drip anywhere. Is that a leak?
That is the usual first sign of a slab leak. Hot supply water warms the floor along the path it is traveling, often well away from the break. There is no cellar to inspect and no puddle to follow. A sudden rise in the water bill plus that warm strip is enough to treat it as an active loss and map it, not wait for a stain.
Open the Phoenix FAQ beside the housing and climate notes.