Serving Sacramento
Structural Drying & Dehumidification in Sacramento, CA
Commercial dehumidifiers and air movers remove moisture from the structure, with daily readings logged from the material itself for claim documentation. Structural drying brings building materials back to a documented dry standard using air movers and dehumidifiers rather than surface evaporation alone. Moisture readings are logged through the process so the substrate, not just the surface, is confirmed dry before anything is rebuilt.
Frequently asked questions
The levees held. Why is the crawlspace still standing in water?
Levees keep river water off the street. They do not lower the water table under the grid, and they do not stop a January atmospheric river from filling the floodplain fill. A dry street and a wet crawl is a normal pair here after a winter storm, because those are two different water bodies. Extract the standing water in the crawl; the lasting control is a drain and a discharge that can run while the table is still high.
What does tule fog do to a wet house that the rain did not already do?
It removes the drying interval. After a storm, inland air would start pulling moisture out of a crawl or a north wall. Fog keeps the air at saturation for days, so wood stays wet and a small leak keeps feeding the same cavity. The rain puts the water in; the fog keeps it there. Mechanical drying — a closed crawl and a dehumidifier — is what actually pulls it out between January cells.
Summer is dry. Does that dry out a winter leak under the slab?
Surfaces, yes. Assemblies, not always. Water that spread under a slab during an atmospheric river can sit in the fill through the dry months because irrigation and the held-up table never fully drop. The dry season hides the problem more than it cures it. A moisture map of the slab edge in July can still show a winter supply-line loss that never wicked to the surface.
This FAQ belongs to the Sacramento page; it is repeated here.