Structural Drying & Dehumidification in Bonita Springs, FL

Cut the power to the affected area if it can be done safely, stop the source, and photograph everything before moving anything. Then get the standing water out. In this climate the interval before extraction starts matters more than almost any later decision, because warm water degrades materials quickly and the outdoor air offers no drying. Calling a contractor before the full extent is known is the right order, since equipment gets committed fast after a regional event.

That is the expected pattern in newer construction here. Building codes since the late 1990s target uplift and opening protection, which is why the roof and the windows held. None of that raises the floor. When surge or a stalled June cell puts water above finished floor level, a new house floods exactly as an old one does. The difference shows afterward, in how much of the structure is sound enough to dry rather than replace.

By meter readings taken in the materials themselves, compared against an unaffected part of the same building, rather than by how a room feels or how long equipment has run. Concrete and block release moisture long after wood framing reaches target, so a slab and a bottom course should be metered specifically. Ask to see the readings and the dry standard being used; a contractor working properly will have both written down.