Serving Garden City
Structural Drying & Dehumidification in Garden City, ID
Commercial dehumidifiers and air movers remove moisture from the structure, with daily readings logged from the material itself for claim documentation. Structural drying brings building materials back to a documented dry standard using air movers and dehumidifiers rather than surface evaporation alone. Moisture readings are logged through the process so the substrate, not just the surface, is confirmed dry before anything is rebuilt.
Frequently asked questions
There is no crawl space, only the underside of the floor.
On a manufactured home that underside is part of the building rather than a void beneath it, and it holds water once any gets in. The wrap, the insulation and the ducting sit there out of reach of anything set up in the rooms above, so drying that ignores them leaves the worst of it in place. Getting the skirting off and treating the underfloor as a room is what makes the difference.
The river came up and the weather was clear.
The level here is set by the mountain melt and by releases from the reservoirs upstream rather than by rain over the city. Those releases are decided for the system as a whole and they are published. For anything near the water the published level and forecast are the numbers to use, and the local sky is close to irrelevant.
The house is not on the bank and the ground is still wet.
Floodplain gravel conducts the river's level sideways very efficiently, so a rise in the channel becomes a rise underfoot some distance inland. Nothing overtops anything and nothing runs across the surface. That is why the wet appears in late spring with the melt rather than after a storm, and why grading achieves less than a pit and a pump.
The same questions, in context, on the Garden City mold removal page.