Serving Twin Falls
Groundwater & Basement Water Intrusion in Twin Falls, ID
Basement seepage, failed sumps, and hydrostatic pressure against the foundation are extracted and dried, and the path from the ground is identified so the loss does not repeat. Groundwater and basement seepage are extracted and dried only after the path from the soil is identified — a wall, a slab, a drain, or a failed sump. Drying the interior without stopping that path returns the same water to the same floor.
Frequently asked questions
The canyon rim is right at the edge of the city.
It is, several hundred feet deep, and the rim is where seepage from the irrigated ground above emerges. That produces springs part way down the face and it undercuts the edge over time. A property near the rim is dealing with what the whole irrigated plateau behind it is putting into the ground.
The falls and the river level are controlled upstream.
They are, by structures operated for irrigation and power, which is why the river here can change dramatically with no weather involved. The schedules are published. For anyone with property near the water, the operating information gives days of warning that no forecast for the local sky ever would.
The soil here is dust when dry and glue when wet.
It is fine wind-laid silt, which stands firm while dry and loses most of its strength once water reaches it. That makes trenches unstable, makes slopes fail without warning after weeks of irrigation, and means that working the ground wet destroys its structure for a season. It is the reason so much here turns on timing.
The same questions, in context, on the Twin Falls mold removal page.