Serving Bolingbrook
Groundwater & Basement Water Intrusion in Bolingbrook, IL
Basement seepage, failed sumps, and hydrostatic pressure against the foundation are extracted and dried, and the path from the ground is identified so the loss does not repeat. Groundwater and basement seepage are extracted and dried only after the path from the soil is identified — a wall, a slab, a drain, or a failed sump. Drying the interior without stopping that path returns the same water to the same floor.
Frequently asked questions
Several pumps on this street gave out the same season.
Uniform construction produces that. The houses were built within a few years of each other and got the same pump at the same time, so they reach the end of their service lives together. It looks like an epidemic and it is arithmetic. If neighbors are replacing pumps, checking yours before the storm season is sensible rather than anxious, and it is far cheaper than doing it during an event.
How long should the pump run after a heavy storm?
Steadily for a day or two is the system working, because this soil releases water slowly and keeps feeding the tile long after the rain stops. What is not normal is a pump that never rests even in dry weather. That usually means the discharge line ends too close to the house and the same water is circulating back into the ground the tile is emptying.
Is a second pump a reasonable expense?
If the lower level is finished or holds mechanical equipment, yes, and the reason is correlation rather than reliability. Severe storms bring power cuts and heavy rain together, so the pump loses power exactly when demand peaks. A battery or water-powered backup breaks that link, and against what is usually down there the cost is small.
These questions come from the Bolingbrook page.