Serving Park Forest
Groundwater & Basement Water Intrusion in Park Forest, IL
Basement seepage, failed sumps, and hydrostatic pressure against the foundation are extracted and dried, and the path from the ground is identified so the loss does not repeat. Groundwater and basement seepage are extracted and dried only after the path from the soil is identified — a wall, a slab, a drain, or a failed sump. Drying the interior without stopping that path returns the same water to the same floor.
Frequently asked questions
Half this street needed the same work in a single year.
That follows from a village built to a handful of plans in one push. The pipe, the tile and the position of the water heater are identical from house to house, so they reach the end of their lives together rather than one at a time. A neighbor's failure is a fair forecast, and asking what the work involved saves time.
The cellar drain backed up and nothing outside had flooded.
A full main relieves itself through the lowest opening it is connected to, and in a house like this that is the floor drain, so what arrives is the street's water rather than the ground's. Nothing done outside the building alters it. What does is a valve on that line, or lifting the drainage above street level with a pump.
There is almost no fall to work with on this ground.
Which limits what is worth attempting. A pipe needs a lower destination and there may not be one on the property. What still earns its cost is keeping water from arriving: roof discharge taken well out, the few inches of fall beside a wall used deliberately, and accepting that a pump has nothing standing behind it.
The Park Forest overview carries this FAQ with the city research.