Serving Camden
Groundwater & Basement Water Intrusion in Camden, NJ
Basement seepage, failed sumps, and hydrostatic pressure against the foundation are extracted and dried, and the path from the ground is identified so the loss does not repeat. Groundwater and basement seepage are extracted and dried only after the path from the soil is identified — a wall, a slab, a drain, or a failed sump. Drying the interior without stopping that path returns the same water to the same floor.
Frequently asked questions
Sewage backed up into the cellar. Whose problem is that?
Usually the public system rather than your plumbing. A combined sewer carries sanitary and storm flow in one pipe, and during an intense cell it surcharges and relieves through the lowest connected opening, which is often a cellar floor drain. Nothing inside the house has failed. A backwater valve on the building sewer is the standard remedy, and confirming whether one exists is worth doing before the next storm rather than after.
Why do some storms do this and larger ones do not?
Rate and tide rather than total. The system handles steady rain well; what defeats it is an inch falling in under an hour on blocks with almost no absorbent ground, especially when the river is high and there is no head to discharge against. A larger total spread over a day never reaches that rate. Checking the tide alongside the forecast is genuinely informative here.
Is cellar water here clean or contaminated?
Assume contaminated when it came up through a drain. Combined sewer relief carries sanitary flow, so porous materials that were submerged should come out rather than be dried in place, and surfaces that stay need cleaning rather than only drying. That is a different scope from a burst pipe, and being clear about the source when the estimate is written avoids a job that leaves problems behind.
Open the Camden FAQ beside the housing and climate notes.