Serving Pickerington
Groundwater & Basement Water Intrusion in Pickerington, OH
Basement seepage, failed sumps, and hydrostatic pressure against the foundation are extracted and dried, and the path from the ground is identified so the loss does not repeat. Groundwater and basement seepage are extracted and dried only after the path from the soil is identified — a wall, a slab, a drain, or a failed sump. Drying the interior without stopping that path returns the same water to the same floor.
Frequently asked questions
Several houses on our street had pump failures the same summer.
That is what uniform construction produces. When a subdivision is built in two or three years, every house gets the same pump model installed at the same time, and they reach the end of their service life together. It looks like an epidemic and it is simply arithmetic. If neighbors are replacing pumps, checking yours is a reasonable precaution rather than an overreaction, particularly ahead of the summer storm season.
Where should the sump discharge actually go?
Far enough from the house that the water does not come back. A discharge that ends a few feet from the foundation puts the water straight back into the soil that feeds the drain tile, so the pump runs continuously and never gets ahead. Ten feet is a common minimum and further is better, ideally to a point that drains away rather than toward the building. This is the single most frequent installation shortcut in newer construction.
Why is July our wettest month rather than spring?
It reflects convective storms rather than frontal systems, which means the rain arrives at high intensity in short periods. Till drains slowly and stays near capacity through the summer, so those intense cells land on ground that cannot take them. Spring rain is generally gentler and the soil has more time to move it along. The consequence is that the storms most likely to cause problems are also the least predictable ones.
The same questions, in context, on the Pickerington mold removal page.