Serving Mission
Groundwater & Basement Water Intrusion in Mission, TX
Basement seepage, failed sumps, and hydrostatic pressure against the foundation are extracted and dried, and the path from the ground is identified so the loss does not repeat. Groundwater and basement seepage are extracted and dried only after the path from the soil is identified — a wall, a slab, a drain, or a failed sump. Drying the interior without stopping that path returns the same water to the same floor.
Frequently asked questions
There is an old channel behind our subdivision. Is it a hazard?
It is the lowest ground nearby, so it fills first and it holds water longest. That is not necessarily bad, since it takes water that would otherwise be somewhere else, and it does mean properties backing onto one should know their elevation relative to it. Treating it as a drainage feature rather than as landscape is the right posture, particularly for anything stored or built close to the bank.
How much warning does a September system give?
Enough, provided the trigger is the rainfall forecast rather than the sight of water. These systems are tracked for days, and what matters locally is the total falling across the district rather than any single gauge. Once several inches are down on flat clay the water is already in place and vehicles stop being useful. The decisions worth making early are what gets lifted and where the cars go.
Was the water that came in clean?
Treat it as contaminated. Water that has crossed roads, yards, and farmed ground picks up what it crossed, so soaked porous materials are removed rather than dried. That is a materially larger scope than a burst supply line, and it is decided in the first hours by identifying where the water came from. Saying so plainly before an estimate is written prevents an argument later.
Read it with the local conditions on the Mission page.