Serving Gillette
Groundwater & Basement Water Intrusion in Gillette, WY
Basement seepage, failed sumps, and hydrostatic pressure against the foundation are extracted and dried, and the path from the ground is identified so the loss does not repeat. Groundwater and basement seepage are extracted and dried only after the path from the soil is identified — a wall, a slab, a drain, or a failed sump. Drying the interior without stopping that path returns the same water to the same floor.
Frequently asked questions
Water got under our manufactured home.
That needs attention quickly because the floor assembly is lighter than a conventional one. Insulation is held in a belly wrap that retains water rather than draining it, ducts often run through the same space, and the decking degrades from below. Opening and draining the wrap, then drying with the skirting removed for airflow, is the standard approach. Water left in a belly wrap does not evaporate on its own.
The draw behind the house is dry except after storms.
That is a channel and it behaves like one when its catchment gets rain. Clay ground here sheds rather than absorbs, so an intense June cell produces flow within minutes and the draw carries it whether or not there is water in it the rest of the year. Anything built, fenced, or stored in the path of that flow is exposed, and it is worth looking at the draw during a storm rather than on a dry day.
Our house went up during a boom. Should that concern us?
It is worth checking rather than worrying about. Rapid construction periods produce good and poor work in the same neighborhoods, and the difference often shows in site preparation and drainage rather than in the visible building. Comparing the lot's grading to what it should be, and checking whether backfill has settled into a trough against the foundation, catches most of what tends to go wrong. Both are cheap to look at and cheap to correct.
The same questions, in context, on the Gillette mold removal page.