Serving Vancouver
Groundwater & Basement Water Intrusion in Vancouver, WA
Basement seepage, failed sumps, and hydrostatic pressure against the foundation are extracted and dried, and the path from the ground is identified so the loss does not repeat. Groundwater and basement seepage are extracted and dried only after the path from the soil is identified — a wall, a slab, a drain, or a failed sump. Drying the interior without stopping that path returns the same water to the same floor.
Frequently asked questions
The soil drains well everywhere except one corner of the property.
That is almost always a fine-grained lens within the outwash. This ground was laid down by enormous floods and it is not uniform: coarse gravel that drains freely can sit above a silt layer that does not. Water infiltrates until it meets that layer, then perches and moves sideways. It surfaces or arrives at a foundation somewhere downslope of where it fell, which is why the wet spot and the source are often not in the same place.
Our drywell or infiltration trench has stopped working.
Two things commonly cause that here. Either it was built into a part of the profile with a fine-grained layer beneath, in which case it never had the capacity it was assumed to have, and it fails once the winter rain becomes continuous. Or it has silted up over years, which is ordinary and fixable. A test during the wet season, rather than in August, tells you which one you are dealing with.
Why do problems here appear in February rather than during a storm?
Because the rain is continuous rather than intense. Nothing gets a dry interval between November and March, so moisture accumulates in crawl spaces and framing week after week without any single event to mark. By late winter the ground is at its wettest and the accumulated moisture in the building is at its highest. Inspecting a crawl space in February tells you far more than inspecting it in summer.
This FAQ belongs to the Vancouver page; it is repeated here.